TRIATHLON Premium P 5W-30 engine oil
ENGOIL-(PREMIUM-P)-5W30-1LTR
Register now and access more than 125,000 products
- Specifically formulated for ensuring maximum service life of the diesel particulate filter
- Provides excellent protection against wear, saves fuel and reduces emissions
- Oil change intervals of up to 40,000 km are possible depending on the manufacturer's specifications
- HC synthetic
- TRIATHLON engine oils are produced and packaged in compliance with the most stringent quality specifications in accordance with DIN EN ISO 9001 and therefore offer a high level of product safety and comprehensive manufacturer approvals.
- Only high-quality refined and raw materials are used for TRIATHLON oils and they fulfil key specifications of automotive manufacturers.
Observe the operating instructions of the vehicle and engine manufacturer for standard and extended oil change intervals.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Latest low-ash, smooth-running engine oil. Especially formulated to ensure maximum service life of particulate filter.
Contents | 1 l |
Type of oil | HC synthesis |
Viscosity grade | 5W-30 |
Approved for engine oils | ACEA C2 |
Recommended applications for engine oils | Honda, Toyota, Fiat 9.55535-S1, ACEA A1/B1, ACEA A5/B5, PSA B71 2290, Mazda |
Shelf life from production | 60 Month |
Density | 0.85 g/cm³ |
Density conditions | at 15°C |
Pour point | -32 °C |
Container | Bottle |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
PRO wheeled workbench
Halogen bulb
Metric double open-end wrench DIN 3110/ISO 1085
3/4" POWERDRIV® socket wrench insert metric, bi-hex
Brick hammer Berlin type
Twist drill bit HSS DIN 338 TYPE RN
Machinist's hammer with plastic handle
Non-slip hazard warning adhesive tape, moulds to shapes, laminated with aluminium foil
PU pneumatic spiral hose set
Infrared laser thermometer